BCLQP - LOGESOL DEVELOPER SYSTEMS CLEANER,PART B
- MSDS: BCLQP
- Manufacturer: HELION INDUSTRIES INC
- Product Name: LOGESOL DEVELOPER SYSTEMS CLEANER,PART B
- National Stock Number: 6750-00N004248
Product Identification
Product ID:LOGESOL DEVELOPER SYSTEMS CLEANER,PART B
MSDS Date:01/01/1985
FSC:6750
NIIN:00N004248
MSDS Number: BCLQP
Responsible Party
Emergency Phone: 201-759-0200
Cage: 0AP29
Contractor
Telephone: 800-327-3456
Cage: 0AP29
Ingredients
SULFURIC ACID (SARA III)
CAS: 7664-93-9
RTECS: WS5600000
Fraction By Weight: 30 1%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
WATER
RTECS: ZC0211000
Fraction By Weight: 70%
Hazards
Effects of Overexposure:SEVERE BURNS TO ALL BODY TISSUE,SKIN & EYE
CONTACTS.
First Aid
First Aid:EYES,SKIN: FLUSH W/ PLENTY OF WATER FOR AT LEAST 15 MIN.
REMOVE CONTAMINATED CLOTHING. CALL MD. INH: REMOVE TO FRESH AIR;GET
PROMPT MEDICAL ATTENTION.
Fire Fighting
Flash Point:NONE
Extinguishing Media:NONE
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:WEAR ACID PROTECTIVE CLOTHING. REMOVE SOURCES
OF IGNITION. FLUSH AWAY USING WATER WATER APPLIED QUICKLY TO AREA.
Handling
Handling and Storage Precautions:PROTECT AGAINST PHYSICAL DAMAGE
Other Precautions:DO NOT DRINK.
Exposure Controls
Respiratory Protection:NONE FOR NORMAL USE (MFR)
Ventilation:MAINTAIN ADEQUATE VENTILATION TO KEEP BELOW TLV.
Protective Gloves:RUBBER/PLASTIC
Eye Protection:CHEM SAFETY GOGGLES
Other Protective Equipment:RUBBER APRON
Supplemental Safety and Health
PART B OF A 3 PART KIT; PART A,B&N. MFR ADDRESS: 681 MAIN ST,
BELLEVILLE, NJ 07109. INCOMPATABILITY: ORGANIC & COMBUSTIBLE
MATERIALS. CHLORATES,NITRATES,FULMINATES & PICRATES.
Chemical Properties
Boiling Pt:B.P. Text:212F;100C
Spec Gravity:1.216
Solubility in Water:COMPLETE
Appearance and Odor:WATER WHITE-NO ODOR
Percent Volatiles by Volume:70
Stability
Stability Indicator/Materials to Avoid:YES
STRONG REDUCING AGENTS,POWDERED METALS,CARBIDES,(SUPP DAT)
Conditions to Avoid Polymerization:MIXING W/MTL THAT RELEASE POISONOUS
GASES-CYANIDES,SULFIDES
Disposal
Waste Disposal Methods:MFR RECOMMENDS: FLUSHING ABOVE,NEUTRALIZING
WASHINGS W/ LIME OR SODA ASH. FLUSH NEUTRALIZED SOLUTIONS TO SEWER.
DISPOSAL METHOD MUST BE IAW FEDERAL, STATE & LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.